Hot
New
In Stock
Pre-order
Out Of Stock

Matek F405-MiniTE Flight Controller

AVAILABILITY: In stock (6 items)

VENDOR: Matek Systems

$84.50

YOU ARE $150.00 AWAY FROM FREE STANDARD AU SHIPPING
PRODUCT INFORMATION
Specifications
Layout
Wiring Diagram
CUSTOMER REVIEWS
PRODUCT INFORMATION

The F405 MiniTE Flight Controller was designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build.

Features
  • F405 has 1MB flash which can run with ArduPilot
  • Redesigned target MATEKF405TE support 8x bi-directional DSHOT
  • Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
  • Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE support 8motors+3servos in INAV/BF multirotor mixer
  • Convertible 20mm to 30.5mm mounting
  • InvenSense GEN3 IMU ICM42605
Specifications

F405-miniTE

  • MCU: STM32F405RGT6
  • IMU: ICM42605
  • OSD: AT7456E
  • Baro: Goertek SPL06-001 (I2C)
  • Blackbox: 16M-byte Flash memory
  • 6 x UARTs, 1 x Softserial_Tx option
  • 12 x PWM outputs (8 x Dshot)
  • 1 x I2C
  • 4 x ADC (VBAT, Current, RSSI, Airspeed)
  • 2 x PINIO
  • 1 x SH1.0_8pin connector (Vbat/G/Curr/R3/S1/S2/S3/S4)
  • 1 x SH1.0_6pin connector for DJI FPV Air Unit
  • 3 x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red)
  • Dual BEC, 5V 1.7A & 10V 1.4A
  • 10V output ON/OFF switchable
  • Convertible 20mm to 30.5mm mounting

Power

  • Vbat Input: 6~30V (2~6S LiPo)
  • BEC: 5V 1.7A cont. (Max.2A)
  • BEC: 10V 1.4A for VTX or DJI Air Unit
  • LDO 3.3V: Max.200mA
  • For stable 10V output, input voltage should > 11V, when input voltage =<11V, output = 90% input voltage.
  • Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
  • No Current Sensor built-in, supports external current sensor of PDB/4in1

FC Firmware

  • ArduPilot: MatekF405-TE
  • INAV: MATEKF405TE (not available in INAV configurator for now)
  • BetaFlight: MATEKF405TE

Physical

  • Mounting
    • 20 x 20mm/F3mm with Silicon Grommets
    • 20 x 20mm/F2mm with Silicon & Brass Grommets
    • 30.5 x 30.5mm/F3mm with Conversion Plate and Silicon Grommets
  • Dimensions: 28 x 28 mm
  • Weight: 5g

Includes

  • 1 x FC F405-miniTE
  • 1 x 20mm to 30.5mm conversion plate(blue PCB)
  • 6 x Silicon grommets M4 to M3
  • 6 x Brass grommets M3 to M2
  • 1 x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
  • 1 x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit
Layout
Wiring Diagram
CUSTOMER REVIEWS

This is a standard cookie notice which you can easily adapt or disable as you like in the admin. We use cookies to ensure that we give you the best experience on our website.

Matek F405-MiniTE Flight Controller

Matek F405-MiniTE Flight Controller

$84.50
Pre-loader