New
In Stock
Out Of Stock

Matek F765-WING Flight Controller

AVAILABILITY: In stock (5 items)

VENDOR: Matek Systems

$109.80

or 6 weekly interest-free payments from $18.30 with Laybuy
PRODUCT INFORMATION
Specifications
F765-WING Layout
INAV Wiring
CUSTOMER REVIEWS
PRODUCT INFORMATION

Matek's line of F7 flight controllers brings a host of new possibilities to your fixed wing or multirotor. Loaded with an array of features and tons of room for peripherals, this board lets you choose how you want to fly.

New features in the F765-Wing include the obvious F7 processor, switchable dual camera inputs, 5V/9V switcher, and a max voltage of 36V (8S).

Specifications
F765-WING Specifications
  • MCU: STM32F765VIT6, 216MHz , 512KB RAM, 2MB Flash
  • IMU: MPU6000 (SPI1) & ICM20602 (SPI3)
  • Baro: BMP280 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card slot (SDIO)
  • 7 x Uarts (1,2,3,4,6,7,8) with built-in inversion
  • 1 x Softserial1_Tx (INAV)
  • 12 x PWM outputs (S1~S10 support Dshot)
  • 6 x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
  • 3 x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 2 x I2C
  • 1 x SPI4 breakout
  • Switchable Dual Camera Inputs
  • Switchable 5V/9V(12V) for Camera/VTX
  • High-precision Current Sense
  • ADC VB2 voltage divider: 1K:10K
  • ADC AirSpeed voltage divider: 10K:10K
  • TR/SA VTX control: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Analog Airspeed sensor: Yes
  • Digital Airspeed sensor: Yes

FC Firmware
  • INAV Target: MATEKF765
  • ArduPilot(ChiBiOS) Target: MATEKF765-WING

PDB
  • Input voltage range: 9~36V (3~8S LiPo) w/TVS protection
  • 2 x ESC power pads
  • Battery Voltage Sensor: 1:10 (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
  • Current Senor: 132A, 3.3V ADC (Scale 250 in INAV, 40 A/V in ArduPilot)

BEC 5V Output
  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Continuous current: 2 Amps, Max.3A

BEC 9V/12V Output
  • Designed for Video Transmitter, Camera, Gimbal ect.
  • Continuous current: 2 Amps, Max.3A
  • 12V option with Jumper pad

BEC Vx Output
  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current: 8 Amps, Max.10A

BEC 3.3V Output
  • Designed for Baro / Compass module and Spektrum RX
  • Linear Regulator
  • Continuous current: 200mA

Physical
  • Mounting: 30.5 x 30.5mm, F4mm with Grommets F3mm
  • Dimensions: 54 x 36 x 13 mm
  • Weight: 26g
F765-WING Layout
F765-WING Layout
INAV Wiring
!-- image -->INAV Wiring
CUSTOMER REVIEWS

Drone Parts Garage uses cookies to deliver the best experience on our website. By continuing to use this website, you are agreeing to our use of cookies. You can learn more about our cookie policy under ‘Cookie Policy’.

COOKIE POLICY
Pre-loader