New
In Stock
Out Of Stock

Matek ASPD-7002 Analog Airspeed Sensor

AVAILABILITY: In stock (3 items)

VENDOR: Matek Systems

$39.60

or 6 weekly interest-free payments from $6.60 with Laybuy

PRODUCT INFORMATION
Specifications
Settings
Wiring
CUSTOMER REVIEWS
PRODUCT INFORMATION

The Matek Analogue airspeed sensor is designed to connect to a supported flight controller (Matek Wing etc) and provide the flight controller with an airspeed sensor reading.

Specifications
Specifications
  • Input Voltage: 4.8~5.2V DC
  • Working current: 20mA
  • Sig pad: 0.5~4.5V output
  • 1/2 pad has voltage divider built-in, 0.25~2.25V output
  • Pressure range: -2 to 2 kPa (-0.3 to 0.3 psi)
  • Speed range: -200 to 200 km/h

Including
  • 1 x ASPD-7002 Analog Airspeed Sensor Module
  • 1 x Pitot Tube
  • 2 x Rubber Tube
Settings
FCFC ADC PadASPD-7002INAVArdupilot
F405-WINGRSSI1/2 padCLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save
ARSPD_TYPE 2
ARSPD_PIN 15
F405-CTR
F405-STD
RSSI1/2 padCLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save
ARSPD_TYPE 2
ARSPD_PIN 9
F722-STDRSSI1/2 padCLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save
/
F722-SEPA4
(Rear of board)
1/2 padset pitot_hardware = ADC/
F722-WINGAirSSig padset pitot_hardware = ADC/
F411-WSEAirSSig padset pitot_hardware = ADC/
F765-WINGAirSSig padset pitot_hardware = ADCARSPD_TYPE 2
ARSPD_PIN 10
F411-WING***ST1pad1/2 padCLI
set rssi_adc_channel = 0
set airspeed_adc_channel = 3
set pitot_hardware = ADC
save
/
Wiring
CUSTOMER REVIEWS

Drone Parts Garage uses cookies to deliver the best experience on our website. By continuing to use this website, you are agreeing to our use of cookies. You can learn more about our cookie policy under ‘Cookie Policy’.

COOKIE POLICY
Pre-loader