In Stock
Out Of Stock

iFlight SucceX Mini F4 BLHeli32 35A VTX Tower Stack


VENDOR: iFlight


or 6 weekly interest-free payments from $20.06 with Laybuy

The SucceX 2-6S Mini F4 V2.1 Tower from iFlight is specially designed for Micro FPV racers!

This stack includes the new generation advanced SucceX mini F4 V2.1 Flight Controller along with the SucceX 35A V2 4-in-1 ESC, which can handle up to 6s input voltage and push your FPV racer to the max. The VTX, FC and ESC neatly stack together with pinned interconnects that make your build easy to assemble and cleaner looking than solder or ribbon cables. This tightly pre-built stack will fit any frame that has 20mm x 20mm mounting holes.

The SucceX Mini F4 V2.1 Tower is the fastest way to go from starting a new micro build to FPV Flight!

iFlight SucceX Mini F4 V2.1 Flight Control

  • STM32 F405 MCU FC w/OSD, integrated MPU6000 accelerometer and gyro
  • Plug-in connection, pin header design, easy to install and disassemble
  • Built-in programmable RGB LED interface
  • Compact size 26*26mm
  • Super-lightweight 4g

iFlight SucceX Mini 35A V2.0 2-6S 4 in 1 ESC

  • STM32F051 MCU, fast responding
  • Added additional capacitors to reduce power noise
  • 32bit ESC with BLHELI32 firmware
  • Supports 2-6S lipo input
  • 4PWM input
  • Compact size 31mm x 31mm
  • Super-lightweight 6.1g
  • Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200

Succex Mini V2.0 48CH Switchable 0/25/100/200/400/500mW Video Transmitter

  • Supports the standard 48-channel set
  • Telemetry input allows remote control by the flight controller (where supported)
  • Change the channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis, and more
  • Variable transmit power from 25 mW to 500 mW. Use 25 mW for a race and then easily switch to 500 mW for freestyle
  • Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air

iFlight SucceX Mini F4 V2.1 Flight Control

  • MCU: 100MHz STM32F450
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • Integrated LC Filter
  • Input Voltage: 2-6S Lipo
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC Output: 5V@3A
  • Size: 26x26mm board, 20mm mounting holes (M2)
  • WS2812 Led Strip: Yes
  • Beeper: For active 5V buzzer
  • SBUS input: Yes
  • Target: OmnibusF4SD
  • Default firmware: Betaflight V3.5.3 ( V3.5.4 or higher version support current meter)
  • Weight: 4g

iFlight SucceX Mini 35A V2.0 2-6S 4 in 1 ESC

  • MCU:STM32F051
  • Current meter: Yes
  • Input:2-6s lipo
  • Installing Hole: 20x20mm, M2
  • Target: iFlight-BL32-4IN1
  • Constant:35Amps
  • Burst:45Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm

Succex Mini V2.0 48CH Switchable 0/25/100/200/400/500mW Video Transmitter

  • Input voltage: 5V
  • Channel: 48
  • Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
  • Size (mm): 24 * 26 mm
  • Mounting Holes Dimension: 20mm x 20mm
  • Connector type: MMCX Connector
  • BEC Output:5V/1A for Camera of FC
  • Antenna: MMCX
  • Weight: 2.3g
  • Traditional button
  • IRC Tramp protocol

Content Included:
  • 1 x SucceX mini F4 V2.1 Flight Controller
  • 1 x SucceX Mini 35A V2.0 2-6S 4 in 1 ESC
  • 1 x Succex Mini V2.0 VTX
  • Cable Set

Drone Parts Garage uses cookies to deliver the best experience on our website. By continuing to use this website, you are agreeing to our use of cookies. You can learn more about our cookie policy under ‘Cookie Policy’.