iFlight SucceX-E F7 + 35A BLHeli_S ESC Mini Stack
AVAILABILITY: In stock (6 items)
VENDOR: iFlight
The SucceX-E Mini F7 Stac by iFlight includes the advanced SucceX-E Mini F7 Flight Controller along with the SucceX-E Mini 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max!
This stack is plug and play - meaning that no soldering is needed. You can plug this stack into your Caddx Vista, analog VTX and it comes with a universal receiver plug!
Features- Gold-plated plug
- BlackBox: 8MB
- Vista HD Plug-and-Play. No need to solder tiny wires.
- BAT, +5V, 3.3, Start indicator
- Smart audio & IRC Tramp VTX protocol supported
- MCU: STM32F22RET6 216 MHz
- Gyro: MPU6000
- Baro: BMP280(I2C)
- OSD: IFLIGHT OSD (AT7456E)
- BEC: 5V 2.5A
- BlackBox: 8MB
- Uart: 4 x UART(UART1, UART2, UART4, UART5)
- UART1 for VTX HD/Analog Telemetry
- UART2 for Receiver
- UART4 for GPS
- UART5 for ESC Telemetry
- 4 × Dshot/PWM outputs
- Smartaudio & IRC Tramp VTX protocol supported
- WS2812 led Strip: Yes
- Beeper: Yes
- Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
- Outer Size: 27 x 27mm / 20 x 20 φ3 mounting
- Weight: 4.9g
SucceX-E 35A 4in1 Mini ESC
- Dimension: 31 x 30mm (including the power pads)
- Mounting Holes: 20 x 20mm φ3mm with grommets φ2mm
- Weight: 6.9g (without wire)
- Supports 2-6S Lipo input
- STM32F051 MCU, 48Mhz Runs BLHeli_S 16.X Firmware
- Current sensor: YES
- BEC: NO
- Constant: 35A / Burst: 40A
- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7
Including
- 1 x SucceX-E Mini 35A V1 2-6S BLHeli_S Dshot600 4-in-1 ESC
- 1 x SucceX-E Mini F7 Flight controller
- 1 x wire harness for F7 Flight controller
- 1 x 8pin wire
- 1 x 50v 470uF capacitor
- 1 x 35v 470uF capacitor
- 8 x Silicone Grommets
- 1 x XT30 connector with 14AWG wire