In Stock
Out Of Stock

iFlight SucceX-D F7 Dual Gyro + BLHeli_32 50A ESC Stack

AVAILABILITY: In stock (4 items)

VENDOR: iFlight


or 6 weekly interest-free payments from $26.11 with Laybuy

The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, iFlight added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

  • Universal USB Type C connector instead of micro USB.
  • Plug-and-Play. (No need to solder tiny wires.)
  • Supports BLHeli pass-through for easy ESC upgrade and configuration.
  • Designed to support DJI Digital FPV.
SucceX-D F7 V2.1 Dual Gyro Flight Controller
  • MCU: 216MHz STM32F722
  • Gyro: 2 x ICM20689
  • Baro: YES
  • Blackbox: 32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale: 100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • Input: USB Type-C
  • RSSI input pad: No
  • UARTs: 5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry: RX5
  • Input voltage: recommended 2-6S, MAX 8S
  • Target: IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions: 36*36mm
  • Weight: 7.5g

SucceX 50A 4in1 ESC
  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S Lipo
  • Constant: 50A / Burst: 60A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot
  • Target: iFlight-BL32-4IN1
  • Mounting pattern: 30.5*30.5mm/φ3mm
  • Dimensions: 43*39mm (including the power pads)
  • Weight:14.4g

  • 1pc x SucceX-D F7 V2.1 Flight controller
  • 1pc x SucceX 50A 4in1 ESC
  • 1 x Wires bag

Drone Parts Garage uses cookies to deliver the best experience on our website. By continuing to use this website, you are agreeing to our use of cookies. You can learn more about our cookie policy under ‘Cookie Policy’.