New
In stock
Out Of Stock

GEPRC SPAN PRO F4 BL32 50A VTX Tower Stack

AVAILABILITY: In stock (9 items)

VENDOR: GEPRC

$172.00

or 6 weekly interest-free payments from $28.66 with Laybuy

PRODUCT INFORMATION
Specifications
Manual
CUSTOMER REVIEWS
PRODUCT INFORMATION

GEPRC is very pleased to introduce SPAN PRO F4 BL32 Tower, which is mainly upgraded for the ESC adjustment part, support 6S Lipo Input, Max 8S. The flight control section has been upgraded to V2.0, which fixes some known problems. FPV Quadcopter’s electronic equipment is basically integrated into two boards, which can greatly reduce assembly time and better layout of quadcopter.

Features:
  • Model:SPAN PRO F4 BL32 Tower
  • MCU:STM32F405 168M
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • Con. Current: 50A
  • Burst Current: 55A (5S)
  • Input Voltage: 3-6S Lipo(Max 8S)
  • FC firmware Version: OMNIBUSF4SD
  • ESC firmware Version: GEPRC-BL32-4IN1
  • Size: 36x36x14mm
  • Mounting holes: 30.5mm
  • Installation height: 14mm
  • Copper thickness: 4OZ*4(Power Layer) +2OZ*2
  • Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
  • Channel: 48CH(IRC Tramp default UART3)
  • VTX Power: PIT/25/100/200/600/800mW
  • High precision CNC heat sink
  • On-Board LC Filter for clear video images
  • Practical – Easy to access connectors
  • Configurable – Choose to use connectors
  • Professional – Symmetrical, Neat and Tidy and Easy to install in Most of frame
  • Toal weight: 26g(FC&VTX+ESC)
Specifications

Specifications:

FC And XTX Board:
  • Model: GEP-F405-VTX58800-2.0
  • MCU: STM32F405 168M
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • Firmware Version: OMNIBUSF4SD
  • Channel: 48CH (IRC Tramp default UART3)
  • VTX Power: PIT/25/100/200/600/800mW
  • OSD: BetaFlight
  • Input Voltage: 3-6S Lipo (MAX 8S)
  • BEC Output: 5V@2A
  • Size: 36x36mm board
  • Mounting hole: 30.5×30.5mm/Ф4mm
  • Weight: 11g
  • Integrated LC Filter

4IN1 50A BLHeli_32 ESC Board:
  • Model: GEP-BL32-50A-4IN1
  • PDB: Integrated
  • Battery Monitoring: Integrated
  • Current sensor: Support
  • Input Voltage: 3-6S Lipo (MAX 8S)
  • BEC: No
  • Con. Current: 50A
  • Burst Current: 55A (5S)
  • Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
  • Firmware Version: GEPRC-BL32-4IN1
  • Mounting hole: 30.5×30.5mm/Ф4mm
  • Size: 36*36mm
  • Copper thickness: 4OZ*4(Power Layer)+2OZ*2
  • Weight: 15g

Content Included:
  • 1 x FC&VTX Board
  • 1 x ESC board
  • 1 x Antenna
  • 1 x Capacitor
  • 1 x MMCX Antenna for easy replacement and upgrades
  • 1 x 4pins JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
  • 1 x 4pins JST-SH sockets with BUZZER & WS2811 RGB LED
  • 1 x 4pins JST-SH socket for Video and Audio transmission
  • 1 x power wire XT60
Manual
CUSTOMER REVIEWS

Drone Parts Garage uses cookies to deliver the best experience on our website. By continuing to use this website, you are agreeing to our use of cookies. You can learn more about our cookie policy under ‘Cookie Policy’.

COOKIE POLICY
Pre-loader