New
In stock
Out Of Stock

Caddx Ratel Starlight FPV Camera

AVAILABILITY: In stock (3 items)

VENDOR: Caddx

$53.50

1.66mm
2.1mm
Yellow
Red
PRODUCT INFORMATION
Specifications
Manual
CUSTOMER REVIEWS
PRODUCT INFORMATION

It's rare that an FPV camera works both as a low-light and daytime flying camera. You usually cannot have one with the other, but Caddx has made this possible with the Ratel! In addition to having different color and lens sizes, there is also the choice of an ND8 filter to help with contrast and light filtering when flying in bright conditions and also reduce jello a small amount.

The Caddx Ratel has superb night vision performance in addition to an excellent daytime image with ultra-low latency. Equipped with high quality 1/1.18" Inch starlight HDR sensor, providing up to 0.0001 Sensitivity of lux. With the OSD menu, you can switch between PAL and NTSC video standards, or between 4:3 and 16:9 video formats. Ultra-low latency of 8ms means you feel locked in with your video.

The 1.66mm lens option gives you a super wide FOV (180°) to see all around you.

Features:
  • High quality 1/1.18" Inch starlight HDR sensor
  • OSD menu
  • Switch between PAL and NTSC video standards or between 4:3 and 16:9 video formats
  • Ultra-low latency of 8ms
  • 1.6mm , 2.1mm, or 2.1mm+ND8 lens options
Specifications
Specifications:
  • Brand Name: Caddx
  • Item Name: Ratel
  • Color: Red, Yellow
  • Lens: 1.66mm, 2.1mm
  • Image Sensor: 1/1.8" Inch starlight HDR sensor 
  • Horizontal Resolution: 1200TVL
  • FOV: 180 Degree
  • Min. Latency: 8ms
  • TV System: NTSC & PAL (changeable)
  • Image: 16:9 & 4:3 (changeable)
  • WDR: Super WDR (HDR)
  • Min. Illumination: Starlight
  • Synchronization: Internal
  • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • S/N Ratio: >60dB (AGC OFF)
  • Video Output: CVBS
  • Camera OSD: Separate OSD
  • DNR: 3-DNR
  • Language: ENG/FRANCE/RUS/SPA/PU/KOREA/CHN/JAPAN
  • Day/Night: Auto/Color/B&W/EXT
  • Dimensions: 19mm*19mm*19mm
  • Wide Power Input: DC 5-40V
  • Work Temperature: -20~+60°C
  • Work Humidity: 20%~80%
  • Weight: 8g (N.W.)/ 40.5g (G.W.)

Content Included:
  • 1 x Camera
  • 1 x 5D-OSD menu board
  • 1 x 4pin FPV silicone cable A extend into a 2pin joint for OSD board and a 3pin joint for FPV)
  • 1 x FPV silicone cable B 2-pin port for both side)
  • 1 x Internal hexagonal wrench
  • 1 x Screws set
  • 1 x Warranty card
Manual
CUSTOMER REVIEWS

Drone Parts Garage uses cookies to deliver the best experience on our website. By continuing to use this website, you are agreeing to our use of cookies. You can learn more about our cookie policy under ‘Cookie Policy’.

COOKIE POLICY
Pre-loader