The Matek F722-PX-W Power Distribution Board (PDB) is specially designed to connect directly to the Matek F722-PX Flight Controller. This two combinations enable Fixed Wing usage for the latest F722-PX Pixel OSD FC. The PDB breaks out common ports and solder pads for servos and ESC connections and connects via a ribbon cable to the flight controller.
This board also uses the standard mounting hole patterns found in most Mini Quads and can also be used with other flight controllers, using solder pads to connect to the flight controller.
PDB
- Input voltage range: 6 ~ 36V (2 ~ 8S LiPo) w/TVS protection
- 2 x ESC power pads
- High precision current Senor: 132A, 3.3V ADC, Scale 250
- BEC 5A, 5V/6V/7.2V Adj
- + & – : Bettery & ESC power pads
- Curr: Current sensor output
- Vbat: Bettery voltage
- G: Ground
- 3V3: LDO 3.3V 500mA
- Vx: BEC 5V/6V/7.2V ADJ
- RX3 and S1~S10 are compatible with MATEKSYS Flight controller F722-PX
- Designed for Servos
- DC/DC synchronous buck regulator
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 5 Amps, Max.5.5A
- Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
- Short-circuit tolerant (2 seconds)
- Mounting: 30.5 x 30.5mm, F3mm
- Dimensions: 41 x 36 mm
- Weight: 9g
Reviews
There are no reviews yet.