New Products

The XING2 2506 Motors come from the XING series NextGen motors and have become a new standard on the market! iFlight is finally ready to announce our predecessor, the XING2! The smooth, reliable, and powerful XING motors with an upgraded...

The XING2 2506 Motors come from the XING series NextGen motors and have become a new standard on the market! iFlight is finally ready to announce our predecessor, the XING2! The smooth, reliable, and powerful XING motors with an upgraded...

Matek's CRSF to PWM converters are useful for anyone needing PWM outputs for connecting to servos and other gear on your model. This little board works with any receiver supporting the CRSF protocol, which includes TBS Crossfire and ExpressLRS receivers....

Tekko32 F4 45A ESC is the latest BLHeli32 ESC from HolyBro. The Tekko32 ESC runs in conjunction with an ARM 32bit compatible F4 MCU. It can run input signals with lower latency, at faster rates, smooths out the RPM band,...

Replacement HALL Gimbal V3 for RadioMaster TX16S radio transmitter. Description: Brand Name: RadioMaster Item Name: Hall Sensor Gimbals Weight: 33g Compatible: for TX16S Transmitter Can be used on left or right side

BETAFPV Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links...

The Mateksys CRSF-PWM-C is a Crossfire / ExpressRS to PWM Converter with 2 UARTS and 10 PWM Outputs. This converter supports any Crossfire Protocol receivers, such as the 433MHz, 868MHz, 915MHz, or 2.4GHz.

The Mateksys ELRS-R24-P Receiver is a 2.4GHz ExpressLRS PMW receiver with 12dbm Telemetry Power. Features 12dbm Telemetry Power 2.4GHz Frequency ExpressLRS

The Matek ELRS-R24-V is a 2.4GHz variometer receiver, perfect for the Gliders and other fixed-wings. The small in form factor can be installed in gliders with restricted payload bays such as DLG’s and high-performance slopers. Not needing to install additional...

Use this board to connect and convert your ELRS signal to SBUS or vice versa.

Mateksys's CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver library to convert ArduPilot supported GNSS, Compass, Barometer, Airspeed sensor, and GPIO based (PWM, Buzzer/LED notify) peripherals to DroneCAN...

Tekko32 F4 BigFET are made for those that uses 20x20 mount and also need the power of big MOSFET. The F4 MCU & quality big MOSFET onboard will provide smooth control, quick response, and big power for racers and freestyle...

The Diatone Mamba Ultra is a budget friendly circular polarized antenna on the market, perfect for both lightweight racing builds or freestyle quads. Specifications Frequency range (MHz): 5500-6000 Polarization: RHCP Gain (dBi): 2.5 VSWR (5800MHZ): ≤1.5 Input connector type: U.FL...

BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current to transferred. This mean the BT2.0 connector can supports 9A continuous current (15A burst) which...

With the use of upgraded micro-nano module adapter, nano tx module can work on transmitters with a Micro port (or JR port) easily. Especially, it supports BETAFPV ELRS Nano TX Module. Compared with the previous version, the internal PCBA has been...

BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links...

BETAFPV Micro receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links...

Mach R5 6mm replacement arms. ((!)) Note: Come as one pair