Electronics

GEPRC is very pleased to introduce SPAN PRO F4 BL32 Tower, which is mainly upgraded for the ESC adjustment part, support 6S Lipo Input, Max 8S. The flight control section has been upgraded to V2.0, which fixes some known problems....

This is F405-CTR Flight Controller by Matek, combining their F405 and PDB together plus many other features such as a built-in baro sensor, BetaFlight OSD, BEC 5V/2A, SD card slot for black-box and current sensor. This could be the new...

This electronic speed controller is T Motor's 4in1 version of their popular F45A ESC. This 4in1 ESC packs 45A into an industrialized PCB layout made with premium features such as a 32bit main control chip, BLHeli_32 firmware, and 6s support....

This is a tiny GPS module with an integrated compass sensor form Matek. Designed to be used when your aircraft does not have much space, the Ublox M8Q module insures you get accurate position information. This unit is designed to...

The F55A Pro is a premium-built ESC from T-Motor. Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware.

F7's are getting better and better, and so is Betaflight's compatibility with them. The Holybro Kakute F7 All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD)...

This Power Distribution Board (PDB) distributes power from a 3~6S LiPo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

Matek is innovating again. This time it came with F722-SE flight controller powered with F7 MCU and featuring dual MPU6000 & ICM20602 gyros that are connected via fast SPI bus, BMP280 Barometer, OSD, 5x Uarts, 8 PWM/Dshot/Proshot/Oneshot outputs, I2C port,...

CL Racing F7 Flight Controller OSD 5V 3.3V BEC & Voltage Monitor Resistor 3-8S for FPV racing drone. Features: F7 Flight Controller OSD BEC STM32F722RET6-216MHz 6-Axis ICM20602 32K Build in Beta flight OSD Up to 8S(36V) direct battery power Build...

Matek's line of F7 flight controllers brings a host of new possibilities to your fixed wing or multi rotor. Loaded with an array of features and tons of room for peripherals, this board lets you choose how you want to...

F7's are getting better and better, and so is Betaflight's compatibility with them. The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight controller (FC) and on-screen display (OSD) in one. The Kakute F7’s...

The Holybro Kakute F4 flight controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot. The faster F4 processor gives room for future feature development: run all features at the fast 8 kHz PID loop rate, at single-digit CPU...

This is the V2 of the Wraith32 ESC by Airbot. The Wraith series of ESCs use a 32bit MCU to take ESC performance to the next level with BLheli32 firmware. Capable of running at speeds up to 32Khz (running Dshot1200...

The Mini Power Hub has been engineered to provide the highest possible performance and reliability in a 36*36mm and 4 layer PCB. The Hub distributes power from a battery pack to 4 ESC's, as well as, providing synchronized and regulated...

This FCHUB-A5 power distribution board (PDB) was designed to be paired with the Matek F405 Mini. Together they work as a great combo for any build. Both the FCHUB-A5 and F405 Mini can be connected using a flat ribbon cable,...

This stack includes the advanced SucceX Micro F4 V1.5 Flight Controller along with the SucceX Micro BLHeli_S 12A 4-in-1 ESC, which can push your FPV racer to the max!

The SucceX F7 V2.1 Twin GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it...

New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. Supports up to 55A burst and 50A continued. Important Extra Cap needed for high current or 6s usage, but the current is very limited. (can't use...